Sawtooth part 2

Second is the CPU heatsink mod i did:


What i wanted was for my CPU to run cooler and any other CPU's that i put in later. Why you ask, doesn't Mac have superior cooling than a regular PC? Well, to a point it does, but i wanted better.

Parts used for this mod was a 40mm fan from an old external SCSI enclosure, a PC molex 24W connector, 2 inch and a half long screws and my original heatsink.
Parts used for this mod was a 40mm fan from an old external SCSI enclosure, a PC molex 24W connector, 2 inch and a half long screws and my original heatsink.
I took out the wires from the 24W PC molex and cut them right at the base of the metal. I did the same with the SCSI 40mm fan.
I took out the wires from the 24W PC molex and cut them right at the base of the metal. I did the same with the SCSI 40mm fan.
From there i soldered the wires to the metal nubs i kept from the 24W molex.
From there i soldered the wires to the metal nubs i kept from the 24W molex.
After the soldering, i put the wires back into the connector and it's hooked up via 12V.
After the soldering, i put the wires back into the connector and it's hooked up via 12V.
I then screwed the fan onto the heatsink and routed the wires so they wouldn't dangle out where they could get pinched.
I then screwed the fan onto the heatsink and routed the wires so they wouldn't dangle out where they could get pinched.
Then i installed the heatsink as pictured, plugged the fan into an unused molex and turned on the machine.
Then i installed the heatsink as pictured, plugged the fan into an unused molex and turned on the machine.

When i turned on my machine, i noticed that it seemed faster. I'm not sure if that's due to the heat being blown off of the heatsink or the fact that my machine had time to cool down for 15 minutes. Either way, it seems to be twice as fast as before. Also for some odd reason, i seem to smell a burnt rubber smell coming from somewhere. I checked the Mac and no smell from that. I am just wondering it it's coming from outside. But in the meantime, i will pull out the wires that i put into the heatsink just in case.